WAVE RLT BELL BOOT G2
Targeted light therapy for the hoof area – and less curved areas on horses and humans
When quality is not just seen – but felt
The WAVE RLT BELL BOOT G2 is designed for one thing:
To provide a stable and targeted WAVE solution for areas where a regular flat pad does not always fit naturally.
Not just in theory.
But around the horse's hoof area, hocks and lower leg – and on less curved areas in humans.
The curved shape makes the Bell Boot particularly practical because it can be placed closer and more stably around areas such as the hoof, ankle, knee, elbow, wrist and neck.
That is why many find that Bell Boot quickly becomes one of those products that makes sense in more situations than initially expected.
The technology behind it – made understandable
- Wavelengths: 660 nm red + 850 nm near-infrared
- LED: 96 light fields in total
- LED structure: 48 red + 48 near-infrared
- Power density: 77.8 – 91.2 mW/cm²
- Total power: 30,000 mW
The most important thing is not just the numbers.
👉 This is how the light is delivered in practice
Power density – the number that makes the difference
Power density is measured in mW/cm² and describes how much light is delivered to the area.
Two products may look similar –
but feel completely different in use.
WAVE G2 is designed for:
- even distribution
- stable output
- uniform experience
At Bell Boot, this is especially important because the product is used on smaller and curved areas where placement and fit are crucial.
660 nm + 850 nm – a proven combination
The two wavelengths work differently:
- 660 nm: closer to the surface
- 850 nm: works without visible light
Together they provide:
- targeted light distribution
- even application
- a calm and controlled WAVE experience
Bell Boot G2 is therefore a simple and stable solution for daily use around the hoof area and less curved areas.
Stability over fluctuation
The WAVE RLT Bell Boot G2 is built with constant current and PCBA with individual circuits.
This means:
- same light level throughout the session
- more stable brightness during use
- fewer fluctuations in output
- uniform use – every time
This is an important detail in practice.
When Bell Boot is used in the stable, at home or after activity, the product should not only be easy to remove.
It must also function stably when used over and over again.
Patented heat control
Comfort without unnecessary heat
Temperature is a crucial – but often overlooked – factor.
The WAVE RLT Bell Boot G2 is designed with heat control so that use remains comfortable and controlled.
This means that the Bell Boot can be used in smaller areas where comfort and fit matter a lot.
This applies, among other things:
- around the horse's hoof area
- at the ankle joint and lower part of the leg
- around the ankle, knee, elbow, or neck in humans
The goal is not high heat.
The goal is a stable and comfortable WAVE experience.
The battery – made for everyday use
The WAVE RLT Bell Boot G2 comes with a rechargeable Lithium-ion battery with timer function.
This means you can use Bell Boot in the stable, at home or on the go without being dependent on a nearby power outlet.
The battery has:
- Lithium-ion: 11.1V / 2200mAh
- Velcro: for fastening
- Timer function: 5–30 minutes
- Charging: via DC 12.6V charger
This means:
👉 You use it when it fits into your everyday life – not only when there is a power outlet nearby.
This makes the Bell Boot practical in the stable, at home and as part of a calm recovery routine after activity.
Flexible fastening – hassle-free
The Bell Boot is designed with Velcro so that it can be placed stably around the horse's hoof area or on less curved areas in humans.
The curved shape makes it easier to place the light close to areas where a regular flat pad may be more difficult to get to lie naturally.
Bell Boot can be used around:
- the horse's hoof area
- codeword
- lower leg
- ankle
- knee
- elbow
- wrist
- neck
- lay
- forearm
You don't have to hold it yourself -
and you can do other things in the meantime.
Created for the hoof area
The Bell Boot was originally developed for the horse's hoof area, pastern joint and lower leg.
The hoof area requires a different type of fit than larger areas such as the back, loin or topline.
That's why the Bell Boot is shaped like a bell so it can be placed more naturally around the hoof.
This makes it relevant to a daily routine around:
- hoof area
- crown rim
- codeword
- lower leg
- less curved areas where stable placement is important
Bell Boot is developed for quiet use in the stable, where the horse is standing still and where you want a simple and practical WAVE solution around the hoof.
Usable far beyond the stable
The Bell Boot is designed for the horse's hoof area.
But in practice, many people quickly discover that it is also practical in other places.
The curved shape makes it particularly interesting in smaller areas where the body curves and where a flat pad does not always follow the area naturally.
For example, on humans, the Bell Boot can be used around:
Neck
The curved shape can be placed around the neck where a larger or flat pad may be less practical.
The Knee
Bell Boot can be placed around the knee area while you are sitting comfortably on the couch or in a chair.
Elbow
The compact size makes it practical for smaller areas where close placement matters.
The ankle
Velcro closure allows the Bell Boot to be placed around the ankle as a gentle part of a post-activity recovery routine.
The Wrist and Forearm
Bell Boot can also be used on smaller areas where a larger pad may feel too large.
This gives the Bell Boot an extra practical value because it is not only relevant in the stable - but also at home, after training, after sports or after a physically active day.
One product – multiple use cases
WAVE is often purchased for one purpose.
But many people quickly find that it is used in several places.
Bell Boot can be used in several realistic everyday situations:
- in the stable around the hoof, crown rim and pastern joint
- together with WAVE Pads on back, neck or topline
- together with the WAVE halter and a Small or Medium Pad
- at home around the ankle, knee, elbow or neck
- after riding, sports or physical work
- as part of a calm recovery routine on the couch or after an active day
A realistic example is the rider who uses the Bell Boot on the horse in the stable – and later that same day uses it around the ankle after sports, training or a long day on their feet.
Or an active household where the Bell Boot is used in the barn one hour and around the ankle, knee or elbow the next.
It's the same product, but in a new situation.
Close placement.
Easy attachment.
And a shape that makes sense where a larger pad might be less practical.
Can be combined with the WAVE halter
The WAVE RLT Bell Boot G2 can also be part of a more complete WAVE routine on the horse.
A special option is to combine the Bell Boot around the hoof area with the WAVE RLT Small or WAVE RLT Medium Pad in the WAVE halter.
This way you can use the Bell Boot around the hoof, while placing a pad in the halter on the horse's head or neck area.
This provides a more flexible everyday routine, where multiple areas can be included in the same session - without it becoming cumbersome.
When the skeptic becomes the one who uses it the most
It is not unusual for a WAVE product to be purchased with the horse in mind.
But after a short time, many discover that the product is also used by the rider, the owner or other active people in everyday life.
Not because anything is promised.
But because Bell Boot is easy to take out, easy to place and makes sense in small areas where a larger pad is often less practical.
This is often how a product goes from being "for the horse" to becoming a natural part of everyday life.
Hygiene and durability
The WAVE RLT Bell Boot G2 is designed with a neoprene backing, Velcro and a transparent protective surface over the diodes.
It helps protect the diodes and makes the product more practical in daily use.
The hoof area is a place where equipment naturally comes into contact with dust, hair, dirt and moist environments.
Therefore, it is important that the product is developed for practical handling and easy cleaning.
The Bell Boot is made to be used in real-world environments:
- in the stable
- by the horse
- at home
- after sports
- by multiple users
- in smaller areas where location matters
As with all technical equipment, the Bell Boot should be used with care and kept clean as needed.
A solid base in the WAVE series
The WAVE RLT Bell Boot G2 is developed as a stable and practical Bell Boot model for daily use around the hoof area, the pastern joint, the lower leg and less curved areas.
It uses 660 nm red light and 850 nm near-infrared light and is an obvious choice for those who want a simple, targeted and reliable solution in the Bell Boot format.
Bell Boot G2 can be used both as a standalone WAVE product and as part of a larger WAVE routine.
For some, the Bell Boot is the obvious first choice because they want a targeted solution for the hoof area, the pastern joint, the lower leg, or less curved areas.
For others, it becomes a natural product next to Small, Medium or Large Pads if they already use WAVE on larger areas such as the back, topline, lower back, neck or shoulders.
If you want a more extended wavelength profile, it may be relevant to look at WAVE RLT Bell Boot G3 or WAVE RLT Bell Boot G4.
What do you get with it?
With the WAVE RLT Bell Boot G2 you get a targeted WAVE solution for the horse's hoof area, lower leg and less curved areas.
The package includes:
- 1 piece WAVE RLT Bell Boot G2
- Velcro top side
- neoprene backing
- transparent plastic window over the diodes
- 1 piece S-strap
- 1 piece M-strap
- 1 piece L-strap
- rechargeable Lithium-ion battery, 11.1V / 2200 mAh
- charger DC 12.6V – charging current: 0.2–1C
- travel suitcase made of shock-resistant EVA material
- manual with pictures, instructions and guidance
Technical data
WAVE RLT Bell Boot G2
- Wavelengths: 660 nm red + 850 nm near-infrared
- LED: 96 light fields in total
- LED structure: 48 red + 48 near-infrared
- Power: 30,000 mW
- Power density: 77.8–91.2 mW/cm²
- Constant current design: PCBA with individual circuits
- Brightness: stable and uniform brightness during use
- Battery: rechargeable Lithium-ion battery, 11.1V / 2200 mAh
- Timer function: 5–30 minutes
- Charger: DC 12.6V – charging current 0.2–1C
- Heat control: patented heat control
- Surface: transparent protective surface over the diodes
- Material: neoprene back and velcro top
- Approval: CE approved
Developed from scratch – not a standard product
WAVE RLT is in-house developed.
This means full control over:
- design
- lighting setup
- battery
- materials
- LED placement
- fastening
- ease of use
- daily handling
Bell Boot is not just an ordinary bell with a light inside.
It has been developed as part of the WAVE system, where light, fit, battery, materials and usage situation must work together in practice.
All parts work together –
and you can feel it in use.
A solution that is being used
The WAVE RLT Bell Boot G2 is not a product that only makes sense on paper.
It is used because it is easy to take out, easy to place and fits in areas where a regular flat pad does not always fit naturally.
In the stable.
At home.
After sports.
After a long day on your feet.
As a standalone WAVE product or as part of a larger WAVE routine.
It is precisely this flexibility that makes Bell Boot a product that many people quickly find multiple uses for.
Reservations
WAVE RLT is developed for well-being, comfort and recovery in everyday life.
If you have any questions about your horse's well-being, it is always recommended to consult a veterinarian.
In case of hoof-related challenges, lameness or diseases, you should always consult a veterinarian, farrier or other relevant professional.
In the event of acute injuries, persistent discomfort or doubts in people, relevant professional assessment should always be sought.
